The Lansmont PDT-56 is our entry level Precision Drop Tester used for smaller products and packages that don’t need electronic controls.
The Lansmont PDT-56 consists of a drop leaf assembly housed in a cast aluminum structure that supports the precision guides and the pneumatic cylinder. This support structure is mounted on a 3 inch (76 mm) diameter chrome-plated steel column that is rigidly fixed to the ½ inch (13mm) thick steel base plate with a heavy-duty collar.
The weight of the drop tester is counterbalanced, changing drop heights is easy; simply remove the lock pin on the rear of the machine, move the assembly up or down as required, and reinsert the pin. The steel column is pre-drilled to give 1 inch (25mm) drop height increments up to 36 inches (914 mm) and 6 inch (152 mm) increments up to 72 inches (1829 mm).
The drop test is initiated through the use of a foot switch, allowing safe, efficient cycling of the Precision Drop Tester. The On / Off switch and power indicator lamp are located on the side of the drop leaf housing, easily accessible to the operator.
Lansmont PDT-56 :: Feature Summary
Controls | Foot switch operation. |
Maximum Drop Capacity | 175 Lbs. (79 Kg) |
Power | Not required |
Features | High-velocity pneumatic cylinder and unique brake system allow extremely accurate flat drop testing that exceed industry standards. |
Positioning | Manual height positioning with guide rod locking pin. Weight of the unit is counter balanced for easy height positioning. |
Height | 105 in. (266.7 cm) |
Weight | 500 Lbs. (227 kg) |