Are your payloads greater than can be handled by the 1800-5? Don’t need the large stroke and low-end performance offered by the 6000? The Lansmont Model 7000 vibration test system is the next actuator in the standard system line-up. The 7000 offers 2.5″ (6.35 cm) of stroke, even greater payload capacities than the 1800-5 or 6000, and can be custom configured in many ways to address your particular vibration testing needs.

The Model 7000 vibration tester was designed to accommodate a wide range of table sizes, from 36″ (91.4 cm) square all the way up to 60″ x 60″ (152 cm) square. Its 2.5″ (6.35 cm) stroke, 9,172 Lb. (41 kN) stall Force actuator can handle payloads up to 2,200 Lbs. (998 Kg) without the optional One-G supports, or 3,900 Lbs. (1,769 Kg) with the One-G supports installed.

Lansmont’s TouchTest Vibration Controls completely integrate all of the test hardware, operating controls, data analysis and reporting functions. The system can perform random vibration, Field-to-Lab® simulations and direct downloads from Lansmont’s SAVER field data recorder, resonance search and dwell, sine sweep and repetitive bounce, all under closed-loop computer control. All of Lansmont’s standard servo-hydraulic vibration test systems include the following:

  • Single control system for all operational and safety functions
  • Reliable, self-contained hydraulic power supply
  • Lansmont initiation and system level training
  • Full range of applications training programs available
  • Comprehensive one-year warranty on all components

Feature Summary

Table Size 98″ x 60″ (249cm x 152cm) – Maximum
Capacity 2,500 lbs. (1,134 kg)
Piston Stroke 2.5″ (6.4cm)