Electrodynamic Shaker Systems (IMV A-Series)

Vibration Test SystemsIMV A Series
Written By Donny Johnson

The A-series is at the cutting edge of shaker design and includes features patented by IMV that increase system durability, decrease maintenance costs and increase user satisfaction. Systems like the innovative Parallel Support Guide (PSG) that provide high axial stiffness to prevent wear and tear. Air cooled and simple to install the systems will bring decades of end-use.

By developing a power amplifier that uses a new next generation Silicon Carbide power module, IMV has achieved extremely low noise and high efficiency. All A-series models are equipped with this new power module as standard.

With standard displacement running from 64 to 76.2mm (size dependent) there’s a shaker for every need.

IMV introduced the Ecology system with the A-Series as an optional upgrade. This system allows for an extreme reduction in power use, and therefore emissions, by intelligently controlling the vibration generator power level, blower fan, and amplifier outputs so no power is wasted. This upgrade achieves an energy saving of up to 70% over traditional shaker systems.

 

Available Models :: Standard Amplifiers

System Model A12/SA1HAM A22/SA2HAM A30/SA3HAM A45/SA5HAM A65/SA6HAM*⁷
Frequency Range (Hz) 0-4500*4 0-3300 0-2600 0-2600 0-2600*5
Rated Sine Force (kN) 12 22 30 45 65
Rated Random Force (kN rms)*1 12 22 30 45 65
Rated Shock Force (kN) 24 44 60 90 130
High Velocity Shock*6 (kN) - - - - -
Max. Acc. Sine(m/s2) 1090 1000 900 900 900
Max. Acc. Random (m/s2 rms) 630 630 630 630 630
Max. Acc. Shock (m/s2 peak) 2181 2000 1818 1800 1806
Max. Acc. High Velocity Shock*6 (m/s2 peak) - - - - -
Max. Vel. Sine (m/s) 2 2 2 2 2
Max. Vel. Shock (m/s peak) 2.5 2.5 2.5 2.5 2.5
Max. Vel. High Velocity Shock*6 (m/s peak) - - - - -
Max. Disp. Sine (mmp-p) 51 51 Sine(mmp-p) 76.2 76.2
Maximum Travel (mmp-p) 64 64 82 82 82
Maximum Load (kg) 200 300 400 600 1000
Power Requirements (kVA)*2 20.4 30 36 57 83
Breaker Capacity (A)*3 40 60 75 100 150
Vibration Generator Model A12 A22 A30 A45 A65
Armature Mass (Kg) 11 22 33 50 72
Armature Diameter (mm) 210 280 290 436 446
Allowable Eccentric Moment (Nm) 294 700 850 1550 1550
Dimensions (mm) WxHxD 946x827x676 1038x920x775 1100x1048x840 1232x1215x1040 1310x1253x1040
Shaker Body Diameter (mm) 585 678 725 825 925
Mass (kg) 1080 1600 2000 3000 3500
Power Amplifier Model SA1HAM-A12 SA2HAM-A22 SA3HAM-A30 SA5HAM-A45 SA6HAM-A65
Maximum Output (kVA) 13 24 31 44 68
Dimensions (mm) WxHxD 580x1950x850 580x1950x850 580x1950x850 580x1950x850 580x1950x850
Mass (kg) 280 350 420 900 1000
Vibration Controller See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2
Cooling Method Air cooling Air cooling Air cooling Air cooling Air cooling
Dimensions (mm) WxHxD*5 1023x2285x531 929x2175x534 1043x2335x640 1160x2405x787 1294x2540x871
Mass (kg) 150 150 150 250 268
Wattage (kw) 4 4 5.5 11 18.5
Duct Hose Diameter (mm) 125 200 200 250 250
 

Available Models :: Eco Amplifier

System Model A12/EM1HAM A22/EM2HAM A30/EM3HAM A45/EM5HAM A65/EM7HAM*⁷ A74/EM8HAM*⁷ A74/EM10HAM*⁷
Frequency Range (Hz) 0-4500*4 0-3300 0-2600 0-2600 0-2600*5 0-2600*5 0-2600*5
Rated Sine Force (kN) 12 22 30 45 65 74 74
Rated Random Force (kN rms)*1 12 22 30 45 65 74 74
Rated Shock Force (kN) 24 44 60 90 130 148 180
High Velocity Shock*6 (kN) 18 36 50 80 120 120 160
Max. Acc. Sine(m/s2) 1090 1000 900 900 900 1000 1000
Max. Acc. Random (m/s2 rms) 630 630 630 630 630 630 630
Max. Acc. Shock (m/s2 peak) 2181 2000 1818 1800 1806 2000 2432
Max. Acc. High Velocity Shock*6 (m/s2 peak) 1636 1636 1515 1600 1666 1621 2162
Max. Vel. Sine (m/s) 2 2 2 2 2 2 2
Max. Vel. Shock (m/s peak) 2.5 2.5 2.5 2.5 2.5 2.5 2.5
Max. Vel. High Velocity Shock*6 (m/s peak) 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Max. Disp. Sine (mmp-p) 51 51 76.2 76.2 76.2 76.2 76.2
Maximum Travel (mmp-p) 64 66 82 82 82 82 82
Maximum Load (kg) 200 300 400 600 1000 1000 1000
Power Requirements (kVA)*2 20.4 30 36 57 83 118 118
Breaker Capacity (A)*3 40 60 75 100 150 175 175
Vibration Generator Model A12 A22 A30 A45 A65 A74 A74
Armature Mass (Kg) 11 22 33 50 72 74 74
Armature Diameter (mm) 210 280 290 436 446 446 446
Allowable Eccentric Moment (Nm) 294 700 850 1550 1550 1550 1550
Dimensions (mm) WxHxD 946x827x676 1038x920x775 1100x1048x840 1232x1215x1040 1310x1253x1040 1310x1253x1040 1310x1253x1040
Shaker Body Diameter (mm) 585 678 725 825 925 925 925
Mass (kg) 1080 1600 2000 3000 3500 3500 3500
Power Amplifier Model EM1HAM-A12 EM2HAM-A22 EM3HAM-A30 EM5HAM-A45 EM7HAM-A65 EM8HAM-A74 EM10HAM-A74
Maximum Output (kVA) 13 24 31 44 68 100 100
Dimensions (mm) WxHxD 580x1950x850 580x1950x850 580x1950x850 1160x1950x850 1160x1950x850 1160x1950x850 1740x1950x850
Mass (kg) 330 410 500 1000 1150 1500 1850
Vibration Controller See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2 See Vibration Controller K2
Cooling Method Air cooling Air cooling Air cooling Air cooling Air cooling Air cooling Air cooling
Dimensions (mm) WxHxD*5 1023x2285x531 929x2175x534 1043x2335x640 1160x2405x787 1294x2540x871 1462x2800x930 1462x2800x930
Mass (kg) 150 150 150 250 268 320 320
Wattage (kw) 4 4 5.5 11 18.5 30 30
Duct Hose Diameter (mm) 125 200 200 250 250 250 250
 

Shaker Videos

Donny Johnson