Challenge Climatic Chambers - Base Series

These chambers are available in both the climatic (humidity and temperature control) and the thermostatic version (temperature control only).

The control and management system is µPLC-based complete with the "KeyKratos" colour touchscreen placed on the door. All chambers are manufactured accordigly to the Total Quality procedures, in compliance with the ISO9001 standard.

On request, they may be also attested by the O conformity statement (EMC tests are conducted inside an anechoic chamber installed in our laboratories).

ACS Challenge Series Features

• Use of ecological refrigerants such as R404a, R134a, R23.
• Humidification system feeded by net water.
• Double 'dry steam' generator to prevent condensation onto specimens.
• µPLC-based control and management system with RS232/RS422 or RS485 serial outputs.
• De-humidification system operating down to -20° C dew point.
• Heated inspection hole: a fully-transparent heating film allows a clear vision of the test compartment from the outside and prevents condensation from forming onto the glass.
• Network connection of several chambers to a single "master" control unit allowing centralised supervision both in local and remote mode.